Efficient Networks 107-0001-000 manual System delsyslogfilter, System delsyslogserver

Chapter 4: System Commands	Efficient Networks® Router family
	Command Line Interface Guide

system delsyslogfilter

Deletes the Syslog address filter. To see the address range of the filter, use the command system list. To define a new Syslog address filter, use the command system system addsyslogfilter.

NOTE:

This command does not require a reboot and is effective immediately.

Mgmt Class

Security (R/W)

Input Format

system delsyslogfilter <firstipaddr> [<last ipaddr>] lan

Parameters

<first ipaddr>a	First IP address of the range.
<last ipaddr>a	Last IP address of the range.b
lan	Local Ethernet LAN.

aDotted-decimal notation

bMay be omitted if the range contains only one IP address.

Response

Command prompt.

system delsyslogserver

Removes an address from the list of Syslog servers. To see the server addresses, use the command system list. To specify a new Syslog server address, use the command system system addsyslogserver.

NOTE:

The new server address becomes effective after a save and a reboot command.

Mgmt Class

Network (R/W)

Input Format

system delsyslogserver <ipaddr>

Page 4-34 Efficient Networks®