Efficient Networks 107-0001-000 manual Remote setcompression, Remote setencryption

Efficient Networks® Router family	Chapter 6: Remote Commands
Command Line Interface Guide

remote setcompression

Enables or disables negotiation of the Stac LZS compression of the payload (RFC 1974). The CCP (Compression Control Protocol, RFC 1962) negotiates and handles any compression between the local router and the remote router.

The default setting is off because LZS compression has a negative effect with high bit rates (greater than 768 Kb/s).

To see the current setting for payload compression, enter remote list and check the Compression Negotiation line. If desired, you can follow the negotiation of the Stac LZS compression within CCP using the debug command mlp debug ccp.

Mgmt Class

Network (R/W)

Input Format

remote setCompression on off <remotename>

Parameters

on	Enables compression negotiation between the local and the re-
	mote router if both routers are set to perform compression and if
	they both share a common compression protocol.
off	Disables compression negotiation. The default is off.
<remotename>a	Name of the remote router.

aASCII string

Response

Command prompt.

remote setencryption

RFC 1969 encryption. Specifies a PPP DES (Data Encryption Standard) 56-bit key with fixed transmit and receive keys.

Mgmt Class

Security (R/W)

Input Format

remote setEncryption DESE RXTX <key> <remotename>

Efficient Networks® Page 6-45