Efficient Networks 107-0001-000 Sntp prefserver number, When entered with no number parameter

Efficient Networks® Router family	Chapter 2: Status Commands
Command Line Interface Guide

Response

-> sntp offset

Current offset from UTC is 0 minutes

Use <system sntp offset> to set time zone usage: sntp offset <Minutes from UTC>

(offset is negative for west, positive for east of Greenwich meridian)

-> sntp offset -360

sntp prefserver

Displays or changes the preferred SNTP server. (The preferred server is the server that should be attempted first when a request is made.)

To specify a server preference, specify the number of the preferred server within the SNTP server list. To see the SNTP server list, enter sntp server.

To see the active SNTP server (that is, the server that last responded to an SNTP request), use the command sntp active.

NOTE:

To make this change permanent, a save must be performed before a reboot.

Mgmt Class

Admin (R/W)

Input Format

sntp prefserver <number>

Parameters

***	When no parameter is entered, current preferred server displayed.
<number>a	Number of a server within the SNTP server list.

aInteger

Response

When entered with no <number> parameter:

-> sntp prefserver

The preferred SNTP server is 1 (192.6.38.127)

Efficient Networks® Page 2-25