Efficient Networks 107-0001-000 manual Undoes an IP address/ host translation remap Ping range

Chapter 5: Ethernet Interface Commands			Efficient Networks® Router family
			Command Line Interface Guide
	Table 5-1: Ethernet Interface Command Listing (Cont.)
	Command	Function
	eth ip addroute	Adds a route to the default routing table for the
		Ethernet interface.
	eth ip addserver	This Network Address Translation (NAT) com-
		mand adds a server’s IP address (on the LAN) as-
		sociated with this interface for a particular protocol.
	eth ip bindroute	Adds an Ethernet route to the named IP virtual
		routing table.
	eth ip defgateway	Assigns an Ethernet default gateway for packets
		whose destination address does not have a route
		defined.
	eth ip delhostmapping	Undoes an IP address/ host translation (remap-
		ping) range.
	eth ip delroute	Removes a route from the default routing table.
	eth ip delserver	Deletes a server entry.
	eth ip directbcast	Enables or disables the forwarding of broadcast
		packets directed to a specific network prefix.
	eth ip disable	Disables IP routing across the Ethernet LAN.
	eth ip enable	Enables IP routing across the Ethernet LAN.
	eth ip filter	Manages the IP filters for the Ethernet interface(s).
	eth ip firewall	Enables and disables Ethernet Firewall Filtering.
	eth ip mgmt	Assigns to an Ethernet interface an IP address
		which is to be used for management purposes only
		and not for IP address translation.
	eth ip options	Enables or disables an IP option for the specified
		Ethernet interface.
	eth ip ripmulticast	Changes the multicast address for RIP-1 compati-
		ble and RIP-2 packets.
	eth ip translate	Controls Network Address Translation on a per-in-
		terface basis.
	eth ip unbindroute	Removes an Ethernet route from the named IP vir-
		tual routing table.
	eth ip vrid	Assigns a virtual router ID (VRID) to an Ethernet in-
		terface.

Page 5-2 Efficient Networks®