Efficient Networks 107-0001-000 manual Idsl Commands, Idsl list, Typical response

Efficient Networks® Router family	Chapter 7: WAN Interface Commands
Command Line Interface Guide

IDSL Commands

This section describes the following commands used to manage an IDSL interface. The IDSL commands found in this section include:

	Table 7-8: IDSL Command Listing
Command	Function
idsl list	Lists the current switch type.
idsl save	Saves the IDSL-related changes across restarts and re-
	boots.
idsl set speed	Specifies the speed of the IDSL connection.
idsl set switch	Specifies link speeds of 64, 128, or 144 Kbps for the
	IDSL connection.
remote setdlci	Sets the DLCI for the remote router entry.
remote setprotocol	Specifies the appropriate link protocol for the IDSL con-
	nection.

idsl list

Lists the current switch type. To change the switch type, use the idsl set switch command.

Mgmt Class

Network (R)

Input Format

idsl list

Parameters

None

Response

Typical response:

-> idsl list

Switch type is FR128

Efficient Networks® Page 7-27