xStack
config authen_enable
require the user to be authenticated using a
local_enable – Adding this parameter will require the user to be authenticated using the local user account database on the Switch.
none – Adding this parameter will require no authentication to access the Switch.
method_list_name – Enter a previously implemented method list name defined by the user (create authen_enable). The user may add one, or a combination of up to four (4) of the following authentication methods to this method list:
| tacacs – Adding this parameter will require the user to be |
| authenticated using the TACACS protocol from a remote |
| TACACS server. |
| xtacacs – Adding this parameter will require the user to be |
| authenticated using the XTACACS protocol from a remote |
| XTACACS server. |
| tacacs+ – Adding this parameter will require the user to be |
| authenticated using the TACACS+ protocol from a remote |
| TACACS+ server. |
| radius – Adding this parameter will require the user to be |
| authenticated using the RADIUS protocol from a remote |
| RADIUS server previously implemented on the Switch. |
| server_group <string 15> – Adding this parameter will |
| require the user to be authenticated using a |
| server group previously configured on the Switch. |
| local_enable – Adding this parameter will require the user |
| to be authenticated using the local user account database |
| on the Switch. The local enable password of the device can |
| be configured using the “config admin local_password” |
| command. |
| none – Adding this parameter will require no authentication |
| to access the administration level privileges on the Switch. |
Restrictions | Only |
Example usage:
To configure the user defined method list “Trinity” with authentication methods TACACS, XTACACS and local, in that order.
Command: config authen_enable method_list_name Trinity method tacacs xtacacs local
Success.
Example usage:
To configure the default method list with authentication methods XTACACS, TACACS+ and local, in that order:
161
