
xStack
NOTE:
When autoconfig is enabled and the Switch is rebooted, the normal login screen will appear for a few moments while the autoconfig request (i.e. download configuration) is initiated. The console will then display the configuration parameters as they are loaded from the configuration file specified in the DHCP or TFTP server. This is exactly the same as using a download configuration command. After the entire Switch configuration is loaded, the Switch will automatically “logout” the server. The configuration settings will be saved automatically and become the active configuration.
Upon booting up the autoconfig process is initiated, the console screen will appear similar to the example below. The configuration settings will be loaded in normal order.
Example usage:
To enable autoconfiguration on the Switch:
Command: enable autoconfig
Success.
Command Line Interface
Firmware: Build
Copyright(C)
Command: download configuration 10.41.44.44 c:\cfg\setting.txt
Connecting to server | Done. |
Download configuration | Done. |
The very end of the autoconfig process including the logout appears like this:
Command: disable authen_policy
Success.
**********
* Logout *
**********
56