D-Link TM DES-6500 manual Reboot, Reset, DES-65004#reset config Command reset config Success

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

reboot

Purpose	Used to restart the Switch.
Syntax	reboot
Description	This command is used to restart the Switch.
Parameters	None.
Restrictions	None.

Example usage:

To restart the Switch:

DES-6500:4#reboot

Command: reboot

Are you sure want to proceed with the system reboot? (y/n)

Please wait, the Switch is rebooting...

reset

Purpose	Used to reset the Switch to the factory default settings.
Syntax	reset {[config system]}
Description	This command is used to restore the Switch’s configuration to the
	default settings assigned from the factory.
Parameters	config − If the keyword ‘config’ is specified, all of the factory
	default settings are restored on the Switch including the IP
	address, user accounts, and the Switch history log. The Switch
	will not save or reboot.
	system − If the keyword ‘system’ is specified all of the factory
	default settings are restored on the Switch. The Switch will save
	and reboot after the settings are changed to default. Rebooting
	will clear all entries in the Forwarding Data Base.
	If no parameter is specified, the Switch’s current IP address, user
	accounts, and the Switch history log are not changed. All other
	parameters are restored to the factory default settings. The Switch
	will not save or reboot.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To restore all of the Switch’s parameters to their default values:

DES-6500:4#reset config

Command: reset config

Success.

DES-6500:4#

21