D-Link TM DES-6500 manual Config vrrp vrid vrid 1-255 ipif ipifname 12 state enable

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

create vrrp vrid

	network connections.
	critical_ip_state [enable disable] - This parameter is used to enable
	or disable the critical IP address entered above. The default is
	disable.
Restrictions	Only administrator-level users can issue this command.

Example usage:

To create a VRRP entry:

DES-6500:4#create vrrp vrid 1 ipif Darren ipaddress 11.1.1.1 state enable priority 200 advertisement_interval 1 preempt true critical_ip 10.53.13.224 critical_ip_state enable

Command: create vrrp vrid 1 ipif Darren ipaddress 11.1.1.1 state enable priority 200 advertisement_interval 1 preempt true critical_ip 10.53.13.224 critical_ip_state enable

Success.

DES-6500:4#

config vrrp vrid

Purpose	To configure a VRRP router set on the Switch.
Syntax	config vrrp vrid <vrid 1-255> ipif <ipif_name 12> {state [enable
	disable] priority <int 1-254> ipaddress <ipaddr>
	advertisement_interval <int 1-255> preempt [true false]
	critical_ip <ipaddr> critical_ip_state [enable disable]}
Description	This command is used to configure a previously created VRRP
	interface on the Switch.
Parameters	vrid <vrid 1-255>- Enter a value between 1 and 255 that uniquely
	identifies the VRRP group to configure. All routers participating in
	this group must be assigned the same vrid value. This value MUST
	be different from other VRRP groups set on the Switch.
	ipif <ipif_name 12> - Enter the name of a previously configured IP
	interface for which to configure a VRRP entry. This IP interface must
	be assigned to a VLAN on the Switch.
	state [enable disable] – Used to enable and disable the VRRP
	router on the Switch.
	priority <int 1-254>- Enter a value between 1 and 254 to indicate the
	router priority. The VRRP Priority value may determine if a higher
	priority VRRP router overrides a lower priority VRRP router. A higher
	priority will increase the probability that this router will become the
	Master router of the group. A lower priority will increase the
	probability that this router will become the backup router. VRRP
	routers that are assigned the same priority value will elect the
	highest physical IP address as the Master router. The default value
	is 100. (The value of 255 is reserved for the router that owns the IP
	address associated with the virtual router and is therefore set
	automatically.)
	ipaddress <ipaddr> - Enter the virtual IP address that will be
	assigned to the VRRP entry. This IP address is also the default

264