
xStack
Command: config pim ipif System hello 35 jp_interval 70 state enabled
Success.
enable pim
Purpose | Used to enable PIM function on the Switch. |
Syntax | enable pim |
Description | This command will enable PIM for the Switch. PIM settings must first |
| be configured for specific IP interfaces using the config pim |
| command. |
Parameters | None. |
Restrictions | Only |
|
|
Usage Example:
To enable PIM as previously configured on the Switch:
Command: enable pim
Success.
disable pim
Purpose | Used to disable PIM function on the Switch. |
Syntax | disable pim |
Description | This command will disable PIM for the Switch. Any previously |
| configured PIM settings will remain unchanged and may be enabled |
| at a later time with the enable pim command. |
Parameters | None. |
Restrictions | Only |
|
|
Usage Example:
To disable PIM on the Switch:
Command: disable pim
Success.
296