xStack
To show OSPF state:
Command: show ospf
OSPF Router ID : 10.1.1.2 |
|
|
| ||
State | : Enabled |
|
|
| |
OSPF Interface Settings |
|
|
|
| |
Interface | IP Address | Area ID | State | Link | Metric |
|
|
|
| Status |
|
System | 10.90.90.90/8 | 0.0.0.0 | Disabled | Link DOWN | 1 |
ip2 | 20.1.1.1/8 | 0.0.0.0 | Disabled | Link DOWN | 1 |
ip3 | 30.1.1.1/8 | 0.0.0.0 | Disabled | Link DOWN | 1 |
Total Entries : 3
OSPF Area Settings
Area ID | Type | Stub Import Summary LSA | Stub Default Cost |
0.0.0.0 | Normal | None | None |
10.0.0.0 | Normal | None | None |
10.1.1.1 | Normal | None | None |
20.1.1.1 | Stub | Enabled | 1 |
Total Entries : 4
Virtual Interface Configuration
Transit | Virtual | Hello | Dead | Authentication | Link |
Area ID | Neighbor Router | Interval | Interval |
| Status |
10.0.0.0 | 20.0.0.0 | 10 | 60 | None | DOWN |
10.1.1.1 | 20.1.1.1 | 10 | 60 | None | DOWN |
Total Entries : 2
OSPF Area Aggregation Settings
Area ID | Aggregated | LSDB | Advertise |
| Network Address | Type |
|
Total Entries : 0
OSPF Host Route Settings
Host Address | Metric Area ID | |
10.3.3.3 | 1 | 10.1.1.1 |
Total Entries : 1
306
