xStack
create cpu access_profile
address mask.
•destination_mac <macmask> - Specifies to examine the destination MAC address mask.
•ethernet_type − Specifies that the switch will examine the Ethernet type value in each frame’s header.
ip − Specifies that the switch will examine the IP address in each frame’s header.
•vlan − Specifies a VLAN mask.
•source_ip_mask <netmask> − Specifies an IP address mask for the source IP address.
•destination_ip_mask <netmask> − Specifies an IP address mask for the destination IP address.
•dscp − Specifies that the switch will examine the DiffServ Code Point (DSCP) field in each frame’s header.
•icmp − Specifies that the switch will examine the Internet Control Message Protocol (ICMP) field in each frame’s header.
•type − Specifies that the switch will examine each frame’s ICMP Type field.
•code − Specifies that the switch will examine each frame’s ICMP Code field.
•igmp − Specifies that the switch will examine each frame’s Internet Group Management Protocol (IGMP) field.
•type − Specifies that the switch will examine each frame’s IGMP Type field.
•tcp − Specifies that the switch will examine each frames Transport Control Protocol (TCP) field.
•src_port_mask <hex
•dst_port_mask <hex
•flag_mask [ all {urg ack psh rst syn fin}] – Enter the appropriate flag_mask parameter. All incoming packets have TCP port numbers contained in them as the forwarding criterion. These numbers have flag bits associated with them which are parts of a packet that determine what to do with the packet. The user may deny packets by denying certain flag bits within the packets. The user may choose between all, urg (urgent), ack (acknowledgement), psh (push), rst (reset), syn (synchronize) and fin (finish).
•udp − Specifies that the switch will examine each frame’s Universal Datagram Protocol (UDP) field.
•src_port_mask <hex
