![](/images/new-backgrounds/1202185/202185329x1.webp)
xStack
Command: config authen_enable default method xtacacs tacacs+ local
Success.
delete authen_enable method_list_name
Purpose | Used to delete a |
| for promoting normal user level privileges to Administrator level |
| privileges on the Switch. |
Syntax | delete authen_enable method_list_name <string 15> |
Description | This command is used to delete a |
| authentication methods for promoting user level privileges to |
| Administrator level privileges. |
Parameters | <string 15> – Enter an alphanumeric string of up to 15 characters to |
| define the given enable method list to delete. |
Restrictions | Only |
|
|
Example usage:
To delete the
Command: delete authen_enable method_list_name Permit
| Success. |
|
|
| |||
|
|
| |
| |||
show authen_enable | |||
|
| ||
Purpose | Used to display the method list of authentication methods for | ||
|
| promoting normal user level privileges to Administrator level privileges | |
|
| on the Switch. | |
Syntax | show authen_enable [default method_list_name <string 15> all] | ||
Description | This command is used to delete a | ||
|
| authentication methods for promoting user level privileges to |
Administrator level privileges. The window will display the following parameters:
Method List Name – The name of a previously configured method list name.
Priority – Defines which order the method list protocols will be queried for authentication when a user attempts to log on to the Switch. Priority ranges from 1(highest) to 4 (lowest).
Method Name – Defines which security protocols are implemented, per method list name.
Comment – Defines the type of Method.
162