D-Link TM DES-6500 manual Show linkaggregation groupid value 1-32 algorithm

xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual

show link_aggregation

Purpose	Used to display the current link aggregation configuration on the
	Switch.
Syntax	show link_aggregation {group_id <value 1-32> algorithm}
Description	This command will display the current link aggregation configuration
	of the Switch.
Parameters	<value 1-32>− Specifies the group ID. The Switch allows up to 32
	link aggregation groups to be configured. The group number
	identifies each of the groups.
	algorithm − Specify to view the algorithm employed of this link
	aggregation group.
Restrictions	None.

Example usage:

To display the current Link Aggregation configuration:

DES-6500:4#show link_aggregation

Command: show link_aggregation

Link Aggregation Algorithm = MAC-source-dest

Group ID	: 1
Master Port	: 2:17
Member Port	: 1:5-1:10,2:17
Active Port:
Status	: Disabled
Flooding Port	: 1:5

DES-6500:4

131