
xStack
show traffic control
traffic control settings. This is specified by listing the lowest switch number and the beginning port number on that switch, separated by a colon. Then the highest switch number, and the highest port number of the range (also separated by a colon) are specified.
The beginning and end of the port list range are separated by a dash. For example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch number 2, port 4.
RestrictionsNone.
Example usage:
To display traffic control setting:
Command: show traffic control
Traffic Storm Control Trap: [Occurred]
Port | Thres | Broadcast | Multicast | DLF | Action | Count | Time | Shutdown |
| hold | Storm | Storm | Storm |
| down | Interval | Forever |
1:1 | 128 | Disabled | Disabled | Disabled | drop | 0 | 5 |
|
1:2 | 128 | Disabled | Disabled | Disabled | drop | 0 | 5 |
|
1:3 | 128 | Disabled | Disabled | Disabled | drop | 0 | 5 |
|
1:4 | 128 | Disabled | Disabled | Disabled | drop | 0 | 5 |
|
1:5 | 128 | Disabled | Disabled | Disabled | drop | 0 | 5 |
|
Total Entries: 5
101