Mitsubishi Electronics WD-52527 manual Appendix B Specifications, TV Specifications

Appendix B: Specifications

From time to time, Mitsubishi may offer software updates to expand the features or operation of this TV. When these updates are available they will be announced on our website site, Mitsubishi-tv.com. If you return your Owner’s registration card, with your model and serial number, you may receive written notification of available software updates.

TV Specifications
Projection System	3 LCD, 0.7” x 3, 1280 x 720 pixels
Lamp	110 watt high-pressure mercury discharge
Channel Frequency Reception	Over-the-Air: VHF 2 - 13, UHF 14 - 69
	Analog Cable: 1 - 125
	Digital Cable: 1 - 135
Channel Type	Over the Air: Analog NTSC, Digital ATSC with sub-channels
		(all 18 video formats)
	Cable:	Analog NTSC (non-scrambled)
		Digital QAM 64 and 256 with sub-channels (non-scrambled)
	CableCARD™: Authorized scrambled and non-scrambled digital channels

Note for Digital Channels: The channel numbers displayed on-screen are determined by the broadcaster or cable company and can vary from the standard frequency number. If there is no channel number information included from the broadcaster or cable company, then the TV will create a channel number based on the frequency number as the

main channel number and the program number as the sub-channel number. When using an authorized CableCARD, the
channel numbers are determined by the cable company.
Inputs
Antenna/Cable input: Qty 2	F connector, 75-ohm
HDMI (digital video/audio): Qty. 2	HDMI standard connector
Signal Type	HDMI standards for digital PCM audio and video (480i, 480p, 720p, 1080i).
	Not intended for use with computer-specific resolutions.
Video/S-Video: Qty. 3 each	Video:	RCA Pin Plug, 1.0 Vp-p, 75 ohm
	S-Video: Four Pin Din Plug
		Y: 1.0 Vp-p 75 ohm
		C: 0.286 Vp-p (burst signal), 75 ohm
Signal Type	NTSC 480i only
Component Video (Y/Pr/Pb)	RCA Pin Plug (EIA-770.3 Standard Levels and Timing)
WD-52527, WD-62527: Qty. 2 sets	Y: 1.0 Vp-p (includes sync), 75 ohm
WD-52528, WD-62528: Qty. 3 sets	Pr: 700 mVp-p, 75 ohm
	Pb: 700 mVp-p, 75 ohm
Signal Type	EIA-770.1 & EIA 770.2, 480i, 480p, EIA 770.3, 720p and 1080i (video
	standards)
Audio Inputs:	RCA Pin Plug 500 mV (full scale), 43 k ohm
WD-52527, WD-62527: Qty. 7 pairs
WD-52528, WD-62528: Qty. 8 pairs
Outputs
Video
Record Video: Qty. 1	Video:	RCA Pin Plug 1.0 Vp-p, 75 ohm
Signal Type	NTSC 480i only
Audio
Audio Outputs	RCA Pin Plug, 500 mV rms + 200 mV (full scale) for analog sources.
Audio Output: Qty. 1 pair	1.5 V + 0.5 V (full scale) for digital sources.
Record Audio Output: Qty. 1 pair

Chapter 6. Special Features 87