Remote Control Functions: Care and Sleep Timer

Sleep Timer

Setting the Sleep Timer:

1.Press SLEEP on the remote control.

2.Each press of SLEEP increases the time displayed by 30 minutes, until the maximum value of 120 minutes is reached.

3.After 5 seconds of inactivity, the message will disappear.

4.Press SLEEP to view the remaining time before the timer turns the TV off.

Canceling the Sleep Timer:

1.Press SLEEP to display the on-screen message.

2.Press SLEEP repeatedly until OFF is displayed.

Note: After 5 seconds of inactivity, the message box disappears.

Hint: If the remote is in the TV layer and the TV will not function, press POWER and 935 to reset the remote.

Care

For Best Results from the Remote Control:

Be within 20 feet of the equipment.

Do not press two or more buttons at the same time unless instructed.

Do not allow unit to get wet or become heated.

Avoid dropping on hard surfaces.

Do not use harsh chemicals to clean. Use only a soft, lightly moistened cloth.

Do not mix new and old batteries.

Do not heat, take apart or throw batteries into fire.

Use only alkaline batteries.

14 Chapter 1. Television Overview

Page 14
Image 14
Mitsubishi Electronics WD-52527 manual Remote Control Functions Care and Sleep Timer, Setting the Sleep Timer