Mitsubishi Electronics WD-52527 manual Channel Menu, Antenna, Prefer Digital, Memory

Models: WD-52527

1 110
Download 110 pages 53.77 Kb
Page 68
Image 68

Channel Menu

Channel

Figure 17

Figure 17. Channel Menu

Antenna

Select the antenna for the channels you want to edit. You can select Ant-1 (main) or Ant-2 (Aux).

Prefer Digital

When a memorized channel is available with the same main channel number in both analog and digital formats, a check mark in the Prefer Digital box will allow digital channels to display and analog channels to be hidden

(when using CH ). Removing the check mark will show both analog and digital choices.

Channel

For editing memorized channels

Channels can be changed in 3 ways:

By pressing ADJUST to select the channel.

By pressing CH for channels already in memory.

By directly entering the number. With so many current and potential channels, the number range is greatly expanded. Channels can be one part, analog or digital (up to the number 16383) or two-part for digital channels (these use a separator). For a two-part digital channel, press SUB/CANCEL on the remote to enter a separator after the first, second or third number, depending on the broadcaster’s channel information.

For digital channels, when the broadcaster has sent a virtual channel number, the virtual channel number is shown in the text box and the original digital channel is shown below on-screen, as a reference.

Memory

After the available channels have been memorized from the Setup Menu, weaker channels can be added. Unwanted channels can also be deleted. Press CH or on the remote control to see the channels in memory. Press ADJUST or to select Added or Deleted for the channel shown in the Channel number box.

Name

Analog channels shown on Antenna-1 or Antenna-2 can be named (up to four characters). After you enter a name, it will appear on the TV screen, next to the channel number.

1.Press ADJUST or to select each letter.

2.Press ENTER to set the letter and move to the next letter position.

3.Press CANCEL to move back one position.

Digital channels are automatically named if the broadcaster sends the information.

Note: Channel names assigned by TV Guide On Screen® take priority over names manually entered here.

68 Chapter 5. TV Menu Screen Operations

Page 68
Image 68
Mitsubishi Electronics WD-52527 manual Channel Menu, Antenna, Prefer Digital, Memory, For editing memorized channels