Kenmore 465.1333 Cycles, Opt, Indicator Lights on Control Panel, Cancel/Drain, Sanitized, Clean

CYCLES, OPT

indicator Lights on Control Panel

See page 5 for all model indicator lights.

i Only the indicator

light for

the currently

selected

delay setting

will be illuminated

during a

Delay Hours

i delay selection. For example, if a 4 hour

delay is selected, the

2 hour and 8 hour delay

indicator lights will not be illuminated (see page 13 for operation of the Delay Hours option).

The Start/Resume

indicator

light, located on the top

of the drawer, will be illuminated while the

Start/Resume

dishwasher

is executing a cycle or delay whether or

not the drawer is open. The Start/Resume

'indicator light will not illuminate in any other mode. If the drawer is opened during a wash

cycle, the Start/Resume indicator light will flash until it is pressed to restart the cycle.

Cancel/Drain

The Cancel/Drain

pad will

illuminate

to

indicate

that a cancel

initiated

drain

is running.

Sanitized

Illuminates

at the

end of the cycle when

conditions

have been met to

achieve

sanitization.

(select models)

I The light will

remain

lit until the

drawer

has been open for 30 seconds

continuously.

Clean

The clean

indicator

light,

located

on

the

control

panel, will

illuminate

as soon

as any

(select models)

cycle except

Quick

Rinse

is completed.

Rinse-Aid Low

Illuminates

when

the rinse aid dispenser

is low

or empty and the drawer

is open.

Notes:

When the Anti-Bacterial (select models), Smart Sense" (select models) or Normal Wash cycle with Sani-Rinse (select models) is selected, the final rinse cycle is monitored to assure sanitization. The Sanitized light will not illuminate if sanitization requirements are not met. This could happen if the cycle is interrupted, power failure occurs or incoming water temperature is below 120° F (/49° F).

The Clean and Sanitized indicator lights will not relight after a power failure until after the next cycle _srun.

14