Problem solving guide

A fault indicator light comes on but the wash programme con- tinues as normal.

Fault indicator

Possible cause

Remedy A

The Check drain light

The drain outlet is

Clean the fluff (drain) filter

flashes.

restricted.

and drain pump.

The Check inlet light

The water inlet is

Check whether

flashes.

restricted.

– the stopcock is opened

 

 

wide enough.

 

 

– the inlet hose is kinked.

 

The filter in the inlet

Clean the filter.

 

hose is dirty.

 

The Excess detergent

Excessive foam has

Use less detergent next

check light comes on.

built up during

time and follow the

 

washing.

recommendation on the

 

 

packaging.

The Main wash indicator

There is a fault.

Start the programme again.

light flashes in the

 

If the fault indicator occurs

programme sequence

 

again, contact the Service

display.

 

Dept.

The Anti-crease/Finish

The position of the programme selector was altered

indicator light flashes in

after the start of the programme. Turn the

the programme

programme selector back to the programme

sequence display.

previously chosen.

 

 

 

 

ATo switch off the fault indicator: Switch off the machine with the I-On/0-Offbutton and turn the programme selector to Finish

38

Page 38
Image 38
Miele Premier 300 Check light comes on, Main wash indicator, Light flashes, Display, Indicator light flashes, Programme