Top-up rinse forCottons
When this is activated, additional wa-
ter flows into the drum at the end of
the main wash and the suds are
cooled down. Hot suds can damage
plastic drainage pipes.
Top-up rinse takes place when
temperatures of 95°C and 75°C are
selected.
Top-up rinse should be activated:
–to prevent the danger of scalding if
the drain hose is hooked over the
edge of a sink or basin.
– where the drainage pipes do not
comply with DIN 1986.
The washing machine is delivered with
the Top-up rinse for
Cottons
deactivated.
Follow steps Ato Gto programme
and store in memory.
Before you begin, first ensure that:
–The washing machine is switched off.
–The machine is properly closed.
–The programme selector is at
Finish
.
APress the
Start
button and keep it
pressed in whilst carrying out steps
Bto C.
BSwitch the machine on with the
I-On/0-Off
button.
CWait until the
Start
indicator light
comes on . . .
D. . . and then release the
Start
button.
ETurn the programme selector to the

Cottons 40°C

position:
If the
Soak/Pre-wash
sequence
indicator light:
does not flash = the Top-up rinse for
Cottons has not
been activated.
flashes = the Top-up rinse for
Cottons has been
activated.
FPress the
Start
button to activate or
deactivate the Top-up rinse for
Cottons
option.
GSwitch the machine off with the
I-On/0-Off
button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
Programmable functions
63