Problem solving guide
The wash programme stops and a fault indicator light comes on.
Fault indicator | Possible cause | Remedy A |
The Check drain light | The water outlet is | Clean the fluff (drain) |
flashes. | blocked. | filter and drain pump. |
| The drain hose has been | The maximum drain |
| fixed too high. | height is 1 m. |
The Check inlet light | The water inlet is blocked. | Open the stopcock. |
flashes. | The filter in the water inlet | Clean the filter. |
| ||
| hose is dirty. |
|
The Check inlet and | The water protection | Call the Service |
Check drain lights flash. | system has reacted. | Department. |
The | There is a fault. | Start the programme |
Rinses indicator light |
| again. |
flashes in the |
| If the fault indicators |
programme sequence. |
| occur again, contact the |
|
| Service Department. |
|
|
|
ATo switch off the fault indicator: Switch off the machine with the
37
