Important control panelfeatures
Programme selector
The programme selector is used to set
the basic wash programme and the
temperature for that programme.
Additional option buttons
Additional options can be added to the
basic programme.
Use the top button to select either the
Short
, the
Pre-wash
or the
Soak
option.
Use the lower button to select the Water
plus option.
The indicator light will come on to show
that the additional option has been
selected.
If an additional option is chosen, which
is incompatible with the basic
programme, it cannot be selected.
"Spin" button with indicator lights
The maximum spin speed which can be
selected depends on the basic
programme chosen.
Maximum
spin
speed
Basic programme
1200 Cottons, Quick wash, Drain/spin,
Starch
1200 Woollens, Separate rinse
900 Minimum iron, Mixed wash
600 Delicates
400 Silks
Select the spin speed.
Press the "Spin" button to select a
different spin speed. However, you
cannot select a spin speed higher than
the maximum allowed for the basic
wash programme chosen.
The indicator lights show the speed
selected.
You can also omit the final spin
^Press the "Spin" button to reach:
–Rinse hold
The laundry is not spun and remains
suspended in the final rinse water.
This reduces creasing if the laundry
is not going to be removed from the
drum immediately after the end of
the programme.
To continue the programme select a
spin speed. When the programme is
finished the
Anti-crease/Finish
light
will come on. Turn the programme
selector to the
Finish
position and
press the
door
button to open the
door and remove the laundry.
–Without spin
The laundry is not spun after the final
rinse. After the water has been
drained away the machine goes
straight into the anti-crease stage.
Spinning between the rinses is also
omitted in this setting (rinse and
interim spin).
Description of the appliance
12