Follow steps Ato Gto programme
and store a setting in memory.
Before you begin, first ensure that:
–The washing machine is switched off.
–The machine is properly closed.
–The programme selector is at
Finish
.
APress the
Start
button and keep it
pressed in whilst carrying out steps
Bto C.
BSwitch the machine on with the
I-On/0-Off
button.
CWait until the
Start
indicator light
comes on . . .
D. . . and then release the
Start
button.
ETurn the programme selector to the
Cottons 75°C
position:
The
Soak/Pre-wash
sequence
indicator light will briefly flash twice in
2 second intervals, to show that
factory Setting 2 is stored in memory.
FEach subsequent press on the
Start
button selects a different setting.
The
Soak/Pre-wash
sequence indicator
light will flash:
–x 1 = Setting 1
higher rinse water level selected
–x 2 = Setting 2
higher water level in the main wash
and rinses (factory setting)
–x 3 = Setting 3
extra rinse in the
Cottons
programme
–x 4 = Setting 4
higher water level in the main wash
and rinses and an extra rinse in the
Cottons
programme
GSwitch the washing machine off with
the
I-On/0-Off
button.
The
Water plus
button has now been
allocated the setting you have chosen.
This setting will remain in memory until
another setting is programmed.
Programmable functions
61