Programmable functions

Soak

A length of time of between 30 minutes and 2 hours can be programmed in 30 minute increments for the soak process.

If the soak button is pressed the selected soak time will be carried out for the period selected before the wash programme is run.

The machine is set as standard to a two hour soak time.

Follow steps A to G to programme and store in memory.

Before you begin, first ensure that:

The washing machine is switched off.

The machine is properly closed.

The programme selector is at Finish.

APress the Start button and keep it pressed in whilst carrying out steps B to C.

BSwitch the machine on with the I-On/0-Offbutton.

CWait until the Start indicator light comes on . . .

D. . . and then release the Start button.

ETurn the programme selector to the Minimum iron 60°C position:

The Soak/Pre-wash sequence indicator light will briefly flash once every 2 seconds, to show that a soak time of 2 hours is stored in memory.

FEach subsequent press on the Start button selects a different setting.

If the Soak/Pre-washsequence indicator light:

flashes x 1 = the soak time is

2hours

flashes x 2 = the soak time is

1hour 30 minutes

flashes x 3 = the soak time is

1hour

flashes x 4 = the soak time is

30minutes

GSwitch the machine off with the I-On/0-Offbutton.

The Soak button has now been allocated the setting you have chosen. This setting will remain in memory until another setting is programmed.

65

Page 65
Image 65
Miele Premier 300 operating instructions Soak