Northern Industrial Tools S500 user manual Error Messages, 119

Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

Display	Problem	Solution	c
S (blinks)	Clock not set.	Set clock.	101
w	Battery running low.	Prepare to charge or	12
		change battery.
K	Battery exhausted.	Charge or change bat-	12
Warning!		tery.
Battery
exhausted.
p (● blinks red)	Camera cannot focus.	• Refocus.	24, 25,
		• Use focus lock.	90
I	Camera cannot perform	Wait until message clears	25
Warning!!	other operations until	from display automati-
please wait for the	recording is complete.	cally when recording is
camera to finish		complete.
recording.
y
I	Write-protect switch is in	Slide write-protect to	19
Memory card is write	“lock” position.	“write” position.
protected.
I	Error accessing memory	• Use approved card.	114
This card cannot be	card.	• Check that connectors	18
used.		are clean.
I		• Confirm that memory	18
		card is correctly
Warning! This card
		inserted.
cannot be read.
I	Memory card has not	Choose [Format] and	19
Card is not formatted.	been formatted for use in	press d to format card,
No	camera.	or turn camera off and
Format		replace card.		Technical
K	Memory card is full.	• Choose smaller image size.	82
Out of memory.		• Delete pictures or	19, 62,
		sound files.	66	Notes
		• Insert new memory card.	18
		• Remove memory card	19
		and use internal memory.

119