See the documentation provided with your television for details.

Connecting to Televisions, Computers, and Printers

Connecting to a TV

Connect the camera to a television using the A/V cable to play back pictures on the television.

1 Turn off the camera.

2 Connect the camera to the TV using the supplied A/V cable.

Connect the yellow plug to the video-in jack on the TV, and the white plug to the audio-in jack.

Connecting to Televisions, Computers, and Printers

Yellow White

3 Tune the television to the video channel.

4 Hold down i to turn on the camera.

The camera enters playback mode, and the pictures taken will be displayed on the television.

While connected to the TV, the camera monitor will remain off.

jBefore Connecting the Camera

Use a fully charged battery or the AC Adapter EH-62D (available separately from Nikon) to prevent the camera from turning off unexpectedly while connected.

jConnecting an A/V Cable

When connecting the A/V cable, be sure that the camera connector is oriented correctly. Do not use force when connecting the A/V cable to the camera. When disconnecting the A/V cable, do not pull the connector at an angle.

jVideo Mode

Be sure that the camera’s video mode setting conforms to the standard used by your televi- sion. The video mode setting is an option set in the setup menu (c 98) > [Interface] (c 111)

68> [Video mode].

Page 80
Image 80
Northern Industrial Tools S500 Connecting to a TV, Before Connecting the Camera, Connecting an A/V Cable, Video Mode