69

Connecting to Televisions, Computers, and Printers
Connecting to a Computer
Use the supplied USB cable to connect the camera to a computer, and copy
(transfer) pictures to a computer with the supplied PictureProject software.

Before Connecting the Camera

Installing PictureProject

Before transferring pictures or movies to a computer, PictureProject must be
installed. For more information on installing and using PictureProject, see the
Quick Start Guide or the PictureProject Reference Manual (on CD).

Confirming USB Option

The following two methods can be used to transfer pictures from the camera
to a computer:
• Click [Transfer] in PictureProject.
• Press E (d) on the camera.
The method used will depend on your computer’s operating system and the
USB option selected in the camera’s setup menu.
1
Refer to the Nikon website for the latest information on operating system compatibility.
2This camera supports the USB options, [PTP] (default setting) and [Mass storage].
3The camera’s E (d) button cannot be used to transfer pictures in the following
cases. Use [Transfer] in PictureProject.
• When transferring pictures from the camera’s internal memory and [Mass storage]
is selected in the USB menu.
• When the memory card write-protect switch is in the “lock” position. Unlock by
sliding the switch to the “write” position before transferring pictures.
4If your computer is running Windows 2000 Professional, be sure to set the USB
option to [Mass storage]. If [PTP] is selected, the [Found New Hardware Wizard] will
be displayed when the camera is connected to the computer. Select [Cancel], close
the window, and disconnect the camera from the computer.
Operating system1
USB mode2
E (d)
on the camera3[Transfer] in PictureProject
Windows Vista (32-bit HomeBasic/
HomePremium/Business/Enter-
prise/Ultimate editions)
Choose
[Mass storage]
.
Choose [PTP] or
[Mass storage].
Windows XP (Home Edition
/Professional) Choose [PTP] or [Mass storage].
Windows 2000 Professional4Choose [Mass storage].
Mac OS X (Version10.3.9, 10.4.x) Choose [PTP]. Choose [PTP] or
[Mass storage].