Northern Industrial Tools S500 user manual Unplug the charger, Charging the Battery

Charging the Battery

CHARGE lamp	Description
Blinks	Battery charging.
On	Battery fully charged.
	Battery error. If ambient temperature is not 5 to 35 °C (41
Flickers	to 95 °F), wait until temperature is in this range before
	charging. Otherwise unplug charger and remove battery
	immediately and take both devices to retailer or Nikon-
	authorized service representative.

3 Unplug the charger

Remove the battery and unplug the charger.

jNote on the Battery Charger

Be sure to read and follow the warnings for the battery charger on pages iii and iv before using the battery charger.

The supplied battery charger is for use only with a Rechargeable Li-ion Battery EN-EL10. Do not use with incompatible batteries.

jNote on the Battery

Be sure to read and follow the warnings for the battery on page iii and the section, “Caring for the Camera” (c 116), before using the battery.

First Steps

k Alternative Power Resources

To power the camera continuously for extended periods, use an AC Adapter EH-62D (avail-
able separately from Nikon) (c 114). Do not, under any circumstances, use another
make or model of AC adapter. Failure to observe this precaution could result in overheat-
ing or in damage to the camera.	13