Northern Industrial Tools S500 user manual 127

Troubleshooting

Problem	Cause/Solution	c
Pictures not displayed on televi-	• Choose correct video mode.	111
sion	• Memory card contains no pictures.	18
	Replace memory card. Remove mem-
	ory card to play back pictures from
	internal memory.
PictureProject does not start	• Camera is off.	20
when camera is connected	• Battery is exhausted.	20
	• USB cable is not correctly connected.	69
	• Appropriate [USB] option is not	70
	selected.
	• Camera is not recognized by the com-	–
	puter.
	• Computer is not set to launch
	PictureProject automatically.
	See the supplied PictureProject Refer-	–
	ence Manual (on CD) (silver) for more
	information on PictureProject.
Cannot mark pictures for transfer	No more than 1,000 pictures can be	71
	marked for transfer. Click [Transfer] in
	PictureProject to transfer pictures.
Transfer marking does not	Pictures were marked for transfer using	72,
appear	another model of camera. Mark pictures	96
	for transfer using COOLPIX S500.
Cannot transfer pictures	d cannot be used to transfer pictures	19
	from internal memory when [Mass stor-
	age] is selected for [USB] or if memory
	card is locked. Transfer pictures using
	the [Transfer] button in PictureProject.
Pictures to be printed or trans-	Memory card contains no pictures.	18
ferred are not displayed	Replace memory card. Remove memory
	card to print or transfer pictures from		Technical
	internal memory.
Cannot select paper size with	Paper size cannot be selected from the	75, 76
camera	camera if the printer does not support		Notes
	the page sizes used by the camera or the
	printer automatically selects the page
	size. Use the printer to select page size.

127