Northern Industrial Tools S500 Selecting Multiple Pictures, Desired picture, Number of copies

Playback Options: The Playback Menu

Selecting Multiple Pictures

When following the steps below to select multiple pictures for a print set (c 79), deletion (c 95), protection from deletion (c 95), transfer (c 96), copying between internal memory and the memory card (c 97), or for the welcome screen (c 100), the screen shown at right is displayed. Follow the procedure described below to select multiple pic- tures.

Protect
Back	ON/OFF

1 Use the rotary multi selector to choose	Protect
the desired picture.
Only one picture can be selected for [Welcome
screen]. Proceed to step 3.
Press v (k) to switch to full-frame playback.
Press t (j) to switch back to thumbnail display.	Back	ON/OFF
2 Press G or H to select [ON] or [OFF] (or	Protect
the number of copies).
When [ON] is selected, a check mark (y) is displayed
in the top left corner of the current picture. Repeat
steps 1 and 2 to select additional pictures.
	Back	ON/OFF
3 Press d.	K
The setting is enabled.
		Done

Shooting, Playback, and Setup Menus

93