Northern Industrial Tools S500 Slide Show, Slide show begins, Press d to pause the slide show

Playback Options: The Playback Menu

z Slide Show

Play back pictures stored in the internal memory or on a memory card in an automated “slide show”.

Slide show Pause:

Start

Frame intvl

Loop

Exit

1 Display the slide show menu; use the
	Slide show
rotary multi selector to choose [Start]		Pause:
and press d.
To change the interval between pictures, choose		Start
		Frame intvl
[Frame intvl], select the desired interval time, and		Loop
press d before choosing [Start].		Exit

To repeat the slide show automatically, enable [Loop]

and press d before choosing [Start]. The check mark (y) will be added to the loop option when enabled.

Shooting, Playback, and Setup Menus

2 The slide show begins.

While the slide show is in progress, the following operations can be performed:

•Use the rotary multi selector to switch pictures. Continue rotating in either direction to fast forward (clockwise) or rewind (counterclockwise).

•Press d to pause the slide show.

The menu shown at right is displayed when the slide show ends or is paused. Choose [Restart] and press d to play the slide show again, or choose [End] to stop the slide show and return to the playback menu.

Pause

Restart

End

Frame intvl

jNotes on Slide Show

•Only the first frame of movies (c 62) included in slide shows is displayed.

•Even if [Loop] is selected, the monitor will turn off automatically if no operations are per- formed for 30 minutes. The camera will turn off automatically if no operations are per-

94formed for another three minutes.