Connecting to a Printer

Connecting the Camera and Printer

1 Set the USB option (c 70) to [PTP].

USB

PTP

Mass storage

Exit

Connecting to Televisions, Computers, and Printers

2 Turn off the camera.

3 Turn on the printer. Check printer settings.

4 Connect the camera to the printer using the supplied USB cable.

5 Turn on the camera.

When connected correctly, the PictBridge start-up screen 1 will be displayed in the camera monitor. Then the print selection screen will be displayed 2.

1

jConnecting the USB Cable

2

Print selection

 

w

When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use force when connecting the USB cable. When disconnecting the USB cable, do not pull the

74connector at an angle.

Page 86
Image 86
Northern Industrial Tools S500 Connecting the Camera and Printer, Set the USB option c 70 to PTP, Connecting to a Printer