Northern Industrial Tools S500 Turn the Camera On and Select L Auto Mode, Exposures remaining

Basic Photography and Playback: Auto Mode

Basic Photography and Playback: Auto Mode

Step 1 Turn the Camera On and Select L (Auto) Mode

This section describes how to take pictures in L (auto) mode, an automatic, “point-and-shoot” mode recommended for first-time users of digital cam- eras.

1 Press the power switch to turn on the camera.

The power-on lamp will light and the monitor will turn on.

Proceed to step 4 when M is displayed.

2 Press C.

3	Use the rotary multi selector to choose
			Shooting
	L and press d.
	The camera enters L (auto) mode.
4	Check the battery level and number of	Battery level indicator
	exposures remaining.

Battery level

Monitor	Description
NO INDICATOR	Battery fully charged.
w	Battery low; charge or replace
	the battery.
K	Battery exhausted. Recharge or
Warning!
	replace with a fully charged
Battery
	battery.
exhausted.

Number of exposures remaining

L	M
	w
	W
	15

Number of exposures remaining

20

The number of pictures that can be stored depends on the capacity of the memory or memory card and image mode setting.