Kenmore 465.1333 manual Coarse Filter Cup, Cleaning the coarse filter plate and coarse filter cup

CARE C G

Coarse Filter Cup

The coarse filter cup is located on the floor of the

dishwasher drawer. It is

designed to collect large food and non-food

items that cannot be

processed through the dishwasher disposal system, i.e. bone, broken glass, etc. Check and empty the coarse filter cup if food soil remains on the coarse filter plate. This ensures foreign objects

are not recirculated through a cycle, causing possible damage to dish load.

Important: Do not start the dishwasher until the coarse filter cup is securely in place and flush with the coarse filter plate. Doing so may damage the dishwasher motor and/or spray arm.

Cleaning the coarse filter plate and coarse filter cup:

If coarse filter plate accumulates food soil, cleaning of the coarse filter cup is needed.

Three-piece rack Cselect models[}

1.Make sure that the dishwasher drawer is cool before you clean the coarse filter plate and coarse filter cup.

2.Pull drawer out to its full extension. Make sure the rack is empty. Fold the variable tines along the back flat on

the rack. Grasp the front center of

the rack and pivot upward to access the coarse filter cup.

. Wipe the coarse filter plate with a damp cloth in a clockwise motion.

4.To remove the coarse filter cup, unscrew the small cap turning in a counterclockwise motion. Lift and remove the coarse filter cup out of the drawer.

5.Empty the cup of hard objects and food soil. Rinse cup under hot water.

6.Place the coarse filter cup back into the coarse filter plate and tighten the cap, turning in a clockwise motion. Make sure the coarse filter cup is flush with the coarse filter plate.

7.Pivot the center rack downward to its original position.

NOteS: Removal of the center rack is not recommended, however if it is needed:

Pull drawer out to its full extension. Make sure the rack is empty. Fold the variable tines along the back flat on the rack. Grasp the front center of the rack and pivot upward.

•Pivot the rack toward the left.

•Pull the rack toward the front of the drawer and lift up to remove.

To reinstall the rack:

•Place the hook in the loop on the back left corner of the rack.

•Pivot the rack to the right, then pivot downward to its original position.

17