5016-001

Paper Jam 202 - (POR complete) Indicates media is jammed at the exit sensor, or the coating roll is missing from the fuser assembly.

Open the fuser cover to access the area of the paper jam.

Be sure the coating roll is installed, not contaminated and operating correctly. Replace if necessary. Check for pieces of paper or other debris in or around the paper exit sensor area of the fuser.

Check the paper exit roller, pinch roller 2 and the pinch roller springs for signs of damage, contamination or broken parts.

If media is jamming at, or over the paper exit sensor, a problem may exist with the paper exit flag or spring. Go to the “Paper Exit Sensor Service Check” on page 2-67.

Paper Jam 202 Duplex Installed - Go to the “Duplex Unit

Symptom Table” on page 2-29

Paper Jam 23X

230 Duplex - Indicates that media is jammed at the top of the duplex unit. Open the top duplex door to access the jam.

231 Duplex - Indicates media is jammed at the rear/vertical area of the duplex unit. Open the rear duplex door to access the jam.

232 Duplex - Indicates media is jammed at the bottom of the duplex unit (paper reversing area, or paper re-feeding area). Remove the duplex tray to access the jam.

Paper Jam 24X - Indicates media is jammed in or around the paper tray X (X= tray 1, 2 or 3) Open tray x to remove the jam.

Paper Jam 250 - Indicates media is jammed in the multipurpose tray. Open the front door to access the jam.

3-2Service Manual

Page 200
Image 200
Lexmark 5016-001 manual Paper Jam 202 Duplex Installed Go to the Duplex Unit