Lexmark 5016-001 manual Two sided print

5016-001

Two sided print

When the printer has been set for two sided print mode and start is pressed the following occurs:

When the setting is two pages. The paper feed roller in the printer starts rotating. The paper is transported by the timing roller and the back page is printed. The paper then passes through the fuser roller. When the leading edge of the paper reaches the paper exit sensor in the fuser, the upper unit motor starts rotating in the normal direction, switching the gate claw to the inner side to receive the paper. When the paper reaches the upper paper pass sensor, through the paper transport roller, the rotation of the motor is switched to the high-speed mode. At the same time, the lower unit motor begins rotating in the normal direction in the high speed mode, transporting the paper to the storage area in the lower unit through the rear unit.

1-30Service Manual