Lexmark 5016-001 manual It is difficult to remove tray

5016-001

A It is difficult to remove tray 1.

Note: Do not force tray 1 from the printer, as damage to the paper detect sensor lever, or pick up roller bracket assembly, may occur. Lift up on the bracket and sensor lever and carefully remove tray 1.

	FRU	Action
1	Paper Detect	Check the paper feed frame, paper detect
	Sensor Lever	sensor lever, release lever, and pick up spring
	Release Lever	for correct installation and operation. If incorrect,
		repair as necessary.
	Pick Up Return
	Spring
	Feed Frame

B Tray 1 is correctly installed and Insert Tray 1 displays. Note: This message displays only when printing a page.

	FRU	Action
1	Paper Tray 1	Be sure the flag molded in the side of the tray is
		not missing or broken.
2	Paper Detect/	If the board assembly, CST cable or engine
	Paper Size Detect	board are failing, the printer does not recognize
	Board Assembly	the installation of Tray 1. Be sure the paper
		detect/paper size detect board is working
		correctly. If no problem is found, replace the
		FRUs in the following order:
		1. Detect board
		2. Engine board

2-100Service Manual