Lexmark 5016-001 manual

5016-001

	FRU	Action
4	Paper Detect	Check the paper detect sensor lever (flag) in the
	Sensor Flag	paper feed unit assembly, for the tray flag that is
	Paper Detect	not feeding, for any signs of broken parts. Be sure
		that it is operating properly. Replace the lever
	Sensor Board	(flag), if necessary.
		Check the paper detect sensor for correct
		operation. If incorrect replace the sensor board.
5	Paper Feed	Check the following paper feed parts, in the paper
	Roller	feed unit, for signs of broken teeth excessive wear
	Paper Pick Up	or binds.
	Roller	•	Paper feed unit clutch.
	Pick Up Gear	•	Paper feed roller shaft, paper transfer roller
			drive gear and paper feed roller.
	Pick Up Roller	•	Paper transfer roller and paper transfer roller
	Idler Gears		idler gears.
		•	Paper pick up roller, paper pick up gear, paper
			pick up roller idler gears.
		Repair or replace any failing FRUs.
6	Paper Feed	Check the paper feed drive assembly gears for
	Drive Assembly	signs of excessive wear, broken teeth or other
		damage. If a problem is found, repair or replace
		the paper feed drive assembly.
7	Tray Option	Check the cables to make sure they are seated
	Cable (OP)	properly and for any signs of damage (OP) to the
	Printer Option	connector contacts.
	Cable (OP)
8	Option	If no problems are found, replace the following
	Interconnect	FRUs in the order shown:
	Board	1. Option interconnect board
	Engine Board
		2. Engine board

2-114Service Manual