Lexmark 5016-001 manual 32MB Sdram

5016-001

Feature	Description
Charging System	Corona
Development	Non-magnetic mono-component
Fusing System	Hot roll fuser 170 degree C
	(Hot roll 30mm, backup roll 34mm)
Operating	• 10 - 35 degrees C (50 - 95 degrees F)
Temperature
Erase System	Light discharge (LED lamp)
Image Transfer	•	Intermediate transfer (primary)
System	•	Transfer roller (secondary)
PC Drum	Photoconductor: OPC (organic photoconductor)
Cleaning System	Blade
Printer Memory	• 32MB SDRAM
		Note: Some models may ship with more memory.
		When a duplex unit is installed, 64MB is the
		recommended minimum printer memory.
	• Maximum usable memory: 384MB
Interface	•	Base printer: parallel standard Centronics protocol
		compliant with bidirectional IEEE 1284B.
	• Network printer: Ethernet standard connection.
Internal	•	Three ports for network adapters, tri-port adapters,
Solutions Ports		parallel port adapters or hard disk.
	• Three memory slots.
Printer Options	• Optional paper drawer: drawer unit with two 250 sheet
		trays installed underneath the printer.
	• Duplex unit: provides two sided color or monochrome
		printing.
	•	Hard disk: 2.5 inch hard disk to store fonts, forms, job
		statistics and spooled jobs (4gt limit).
Internal Print	Internal print servers available to support the following
Servers	topologies:
	• Ethernet 10BaseT and 10Base2.
	• Ethernet 10/100Base TX.
	• Token-Ring (connects the printer to a Token-Ring
		network via DB9 or FJ45).

1-4Service Manual