Right Side Cover Removal, Top Cover Removal

Right Side Cover Removal

1.Raise both the fuser door and the cartridge cover.

2.Open the bypass tray 2.

3.Remove the four (4) screws from the right side cover.

4.Close the bypass tray 2.

5.Remove the right side cover.

1.Remove the rear cover, refer to the “Rear Cover Removal” on page 4-3.

2.Remove the left side cover, refer to the “Left Side Cover Removal” on page 4-3.

3.Remove the right side cover, refer to the “Right Side Cover Removal” on page 4-4.

4.Remove the operator panel cover, refer to the “Operator Panel Cover Removal” on page 4-3.

5.Remove the six (6) screws from the top cover and remove the cover.

Note: Take care not to lose the two cartridge door springs attached to the two screws on the left and right of the top cover.

1.Remove the top cover, refer to the “Top Cover Removal” on page 4-4.

2.Lift the top (small) cover.

3.Remove the three (3) screws from the bottom of the cover.

4.Remove the cover top (small) cover.

4-4Service Manual