Lexmark 5016-001 manual Offset Print Service Check

5016-001

	FRU	Action
5	HVPS	Be sure the HVPS is correctly installed and
		securely mounted to the HVPS mounting bracket
		and grid block assemblies.
		• If correct, remove the HVPS and be sure the
		high voltage contacts align with the contacts on
		the HVPS.
		• Look for signs of pitting or damage.
6	Printhead	The printhead can cause this problem, but should
		only be replaced after a new toner cartridge(s) or
		ITM has been replaced.

Offset Print Service Check

	FRU	Action
1	Cleaning Unit	Check the cleaning unit for proper installation
		and contamination.
		If signs of contamination or damage exist,
		replace the cleaning unit.
2	Fuser Assembly	Check the fuser assembly for signs of
		contamination of the hot roll or backup roll.
		If signs of contamination or damage exist,
		replace the fuser assembly.

2-88Service Manual