Lexmark 5016-001 manual

5016-001

Message	Status	Action
52 Flash Full	There is not enough	Press Go to clear the
	space available to hold	message and continue
	the resources you want to	processing. Downloaded
	store in flash memory.	fonts and macros not
		previously stored in flash
		memory or disk are deleted.
		To reset the printer:
		• Press Menu> or <Menu.
		The Job Menu is
		displayed.
		• Press Menu> or <Menu
		until Reset Printer
		appears on the second
		line.
		• Press Select.
53 Unformatted	The flash memory	Press Go to clear the
Flash	installed in your printer	message. To format flash
	has not been formatted.	memory, select Format
	You must format the flash	Flash from the Utilities
	memory before	Menu.
	downloading resources.
54 Serial Option x	The printer has detected a	Press Go to clear the
Error	protocol error on the	message and continue
	specified serial interface.	printing. The job may not
	Be sure the serial	print correctly.
	interface parameters are	To reset the printer:
	set up correctly and you
	are using an appropriate	• Press Menu> or <Menu.
	serial cable.
		The Job Menu is
		displayed.
		• Press Menu> or <Menu
		until Reset Printer
		appears on the second
		line.
		• Press Select.

2-20Service Manual