Lexmark 5016-001 manual

5016-001

Message	Status	Action
35 Res Save Off	The printer lacks the	To disable Resource Save
Deficient Memory	memory needed to enable	and continue printing, press
	the Resource Save	Go.
	function. This message	To enable Resource Save
	usually indicates that too
	much memory is allocated	after you get this message,
	for one or more of the	perform one of the following:
	printer link buffers.	•	Set the link buffer for
			each interface to Auto.
			Then exit the menus to
			activate the link buffer
			changes. When the
			Ready message is
			displayed, enable
			Resource Save from the
			Setup Menu.
		•	Install additional printer
			memory.
37 Insufficient	The printer memory (or	Press Go to print the portion
Collation Area	optional hard disk, if	of the job already stored and
	installed) does not have	begin collating the rest of
	the space necessary to	the job.
	collate the print job.	To cancel the print job:
		• Press Menu> or <Menu
			until the Job Menu is
			displayed.
		• Press Menu> or <Menu
			until Cancel Job appears
			on the second line.
		•	Press Select.
37 Insufficient	The printer is unable to	Press Go to clear the
Defrag Memory	perform the requested	message.
	Flash Memory
	Defragment operation	If you want to perform the
	because the printer does	defragment operation,
	not have enough memory.	delete fonts, macros, and
	This message is posted	other data in RAM and try
	before the operation	again or install more
	begins to ensure items in	memory.
	flash memory are not lost.

Diagnostic Information 2-17