Lexmark 5016-001 manual Until the Job Menu is

5016-001

Message	Status	Action
Waiting	The printer has received a	•	To print the contents of
	page of data to print but is		the print buffer, press
	waiting for an End of Job or		Go.
	Form Feed command or for	•	To cancel the print job,
	additional data.
			press Menu> or <Menu
			until the Job Menu is
			displayed. Press Select.
			Press Menu> or <Menu
			until Cancel Job appears
			on the second line.
			Press Select.
Not Ready	The printer is not ready to	• Press Go to remove the
	receive or process data,		printer from the Not
	because someone selected		Ready state.
	Stop when another	•	To cancel the print job,
	message was displayed.
			press Menu> or <Menu
			until the Job Menu is
			displayed. Press Select.
			Press Menu> or <Menu
			until Cancel Job appears
			on the second line.
			Press Select.
Ready Hex	Hex Trace diagnostic mode	• To exit Hex Trace mode,
	is active, and the printer is		turn the printer off or
	ready to receive data.		reset the printer.
	Use Hex Trace to isolate	•	To reset the printer,
			press Menu> or <Menu.
	the source of a print job
			When the Job Menu is
	problem. With Hex Trace
			displayed press Select.
	selected, all data sent to
			Press Menu> or <Menu
	the printer is printed in
			until Reset Printer
	hexadecimal and character
			appears on the second
	representation.
			line. Press Select.
	Control code strings are
	printed, not executed.
Locking Menus	Someone has locked the	N/A
	menus. While the menus
	are locked, users cannot
	change the printer default
	settings from the operator
	panel.

2-8Service Manual