5016-001

Message

Status

Action

 

 

 

56 Parallel Port x

Data was sent to the

Press Go to clear the

Disabled

specified parallel port, but

message. The printer

 

the port has been disabled

discards the data sent to the

 

from the parallel buffer

parallel port.

 

menu item.

To reset the printer:

 

 

 

 

• Press Menu> or <Menu

 

 

until the Job Menu is

 

 

displayed.

 

 

• Press Menu> or <Menu

 

 

until Reset Printer

 

 

appears on the second

 

 

line.

 

 

• Press Select.

 

 

 

56 Serial x Port

Data was sent to the

Press Go to clear the

Disabled

specified serial port, but

message. The printer

 

the port has been disabled

discards the data sent to the

 

from the serial buffer

serial port.

 

menu item.

To reset the printer:

 

 

 

 

• Press Menu> or <Menu

 

 

until the Job Menu is

 

 

displayed.

 

 

• Press Menu> or <Menu

 

 

until Reset Printer

 

 

appears on the second

 

 

line.

 

 

• Press Select.

 

 

 

58 Too Many

You have more than one

Turn the printer off and

Disks Installed

hard disk installed.

follow the instructions in

 

 

your Setup Guide for

 

 

installing an optional hard

 

 

disk.

 

 

 

58 Too Many

You have more than one

Turn the printer off and

Flash Options

flash option installed.

follow the instructions in

 

 

your Setup Guide for

 

 

installing and removing flash

 

 

memory.

 

 

 

Diagnostic Information 2-23

Page 89
Image 89
Lexmark 5016-001 manual Your Setup Guide for