Lexmark 5016-001 manual Check the voltages on the inline CRF cable

5016-001

FRU	Action
3 Registration Roller	Check the resistance of the registration clutch. It
Clutch Assembly	should measure between 135 and 175 ohms.
(CL01)	Also check from the case of the clutch to either
	winding. It should measure infinity. If incorrect
	for either, replace the clutch assembly.
	Note: The registration clutch cable, (two blue
	wires), connect to the CRF cable, (violet and
	orange), near the clutch assembly.
	Check the voltages on the inline CRF cable
	connector.
	Registration roller clutch voltages:
		Signal	Voltage	Voltage
	Pin #	Voltage	Static	Energized
	1 (Orange)	+24 V dc	+24 V dc	+24 V dc
	2 (Violet)	-SL10N	0 V dc	+24 V dc
	Note: All voltages are approximate
	If the voltages are incorrect, check the CRF
	cable. If the cable is good, replace the engine
	board.
	If the voltage on Pin 1 is incorrect, check the
	continuity of the CRF cable.

•If incorrect, replace the cable.

•If correct, replace the engine board.

Diagnostic Information 2-69