Lexmark 5016-001 manual Pin

5016-001

Message	Status	Action
Load Manual	You have sent a request	To clear the message, load
	for a manual feed job to	media of the requested size
	the printer, and the printer	and type in the multipurpose
	is ready for you to insert a	feeder. Press Select or Go
	single sheet or envelope	to ignore the manual feed
	into the multipurpose	request and print on media
	feeder. The message	already installed in one of
	displays either the custom	the paper sources. If the
	media name defined using	printer finds a tray that has
	the MarkVision utility, the	media of the correct size
	media size, or the media	and type, it feeds media
	size and type it is looking	from that tray. If the printer
	for.	cannot find a tray with the
		correct media size and type,
		it prints on whatever media
		is installed in the default
		paper source.
		To cancel the print job.
		• Press Menu> or <Menu.
		The Job Menu is
		displayed.
		• Press Menu> or <Menu
		until Cancel Job appears
		on the second line.
		• Press Select.
No Jobs Found	This attendance message	• Press Go to enter another
Retry?	occurs if you have entered	PIN.
	a PIN (Personal	• Press Return or Stop to
	Identification Number) to
		exit the PIN entry
	print or delete a
		operation.
	Confidential Print Job and
	your PIN is not associated
	with any Confidential Print
	Job currently stored in the
	printer.
Print Jobs on	Jobs that were spooled to	• Press Go to print the jobs.
Disk?	the optional hard disk	• Press Return or Stop to
	before the printer was last
		delete the jobs from the
	turned off have not yet
		disk without printing
	printed.
		them.

Diagnostic Information 2-15