Lexmark 5016-001 manual Options Service Checks, Flash Memory Options Service Check

5016-001

Options Service Checks

When you have a problem with any of the options installed in the options slots on the interconnect board, switch the non-operating option to one of the other option slots, to isolate the failure.

Flash Memory Option(s) Service Check

Run a copy of the test page and verify the option you are checking is listed. The printer does not recognize options installed, if those options are not listed. Be sure the Memory SIMM is installed correctly and not broken or damaged. If the Memory SIMM is correctly installed, not broken or damaged, run the “Flash Test” on page 3-17. If the test fails, replace the Flash SIMM. If the problem continues, replace the controller board.

DRAM Memory Option(s) Service Check

This service check is the same as the flash memory option service check with the following exception:

If the DRAM Memory SIMM is correctly installed and not broken or damaged, run the “SDRAM Memory Test” on page 3-10from the menu. If the test fails, replace the DRAM SIMM. If the problem continues, replace the controller board.

2-106Service Manual