Lexmark 5016-001 manual Hard Disk Option Service Check

5016-001

Hard Disk Option Service Check

Verify the hard disk and the hard disk board are correctly installed. When a problem is suspected, either with the hard disk system board or the hard disk, run the “Quick Disk Test” on page 3-16.

Note: The Quick Disk Test is a non-destructive test and indicates pass or fail. If the test fails, replace the hard disk. If a problem still exists, replace the hard disk board.

The “Disk Test/Clean” on page 3-17is used to restore the disk, if the disk is unusable, or contains bad data. This test is divided into a cleaning and a verifying or testing section.

Note: This test leaves the hard disk unformatted and can be a very lengthy test, depending on disk size. The servicer, or user, must reformat the disk using the Format Disk Menu operation. The test destroys all data and should not be performed on a known good disk.

Diagnostic Information 2-107